Design Engineer- Hydraulics
- Faridabad, Haryana
- Permanent
- Full-time
- Review and preliminary hydraulic designs for hydraulic structure like Dam, Barrage, Intake, Water conductor system etc.
- Developing initial ideas for Planning and designing of Hydro project and PSP
- Water Availability studies and Power potential studies
- Surge Shaft
- Quantity estimation
- Numerical analysis in HEC RAS Software (1D and 2D)
- Numerical analysis in 3D Software (like flow 3D Hydro)
- Reservoir sedimentation studies for fixing new zero elevation of the reservoir and long-term siltation profile
- Transient analysis (Whamo OR Hammer)
- Desilting chamber
- Energy dissipation arrangement
- Reservoir planning, Various zones of reservoirs, Area-elevation & Storage elevation curve, Design storm studies, Standard Project Flood (SPF), Probable Maximum Flood (PMF). Guidelines for selecting design flood
- Hydrograph analysis, Separation of stream flow components, Unit Hydrograph, Synthetic Unit Hydrograph,
- Peak flood estimation at site, Flood Frequency analysis, Selection of design return period, Annual and partial duration series, regional flood frequency analysis, Reservoir and channel flood Routing.
- General layout of water conductor system and Head loss calculation
- Powerhouse Drainage
- Water Surface Profiles in River
- Dam Break Studies and Flood Damage Mitigation
- Initial filling Plan for reservoir
- River Diversion arrangements which include coffer dams and diversion tunnel or channel
- Cross drainage structures, Guide bunds and Flood Protection embankments
- Water availability studies and G&D measurements
- Design and Diversion Flood Studies
- Power Potential studies
- Understanding of topographic and bathymetric survey
- Geographic information system
- Understanding of Physical model study for Hydraulic and Reservoir sediment model
- Soil and Rock Scour Calculation
- Uplift Pressure Calculation
- Depth of cut-off and Protection works
- Preparation of Design Basis and Hydraulic design Reports
- Hydraulic studies for reverification various levels like Top level of Dam / Barrage, Spillway invert level, Sizes of Spillway bays, Dimensions of Energy dissipation arrangement and Intake invert.
- Pressure transient analysis of the system is carried out to check and optimize the suitability of upstream surge shaft and downstream surge tank.
- Hydrological studies for the project covering
- Water availability
- Flood studies
- Sedimentation studies in the reservoir
- Hydrological and Hydraulic calculation of Cross Drainage Structures (Bridges and Culverts)
- Comprehensive drainage system for Roads of Project Area
- Performing calculations and simulations to evaluate the performance of the Hydro-Structure systems, including 1D, 2D and 3D analysis, Power potential calculations
- Comparison of Numerical and Physical Model Studies
- Formulation of Numerical models and conducting thorough analysis to identify any design flaws